Camera VW Rear view camera VW Crafter 03/2017-2022

VW Crafter II (SX/SY/SZ) 03/2017 - 2022 for mounting on the 3rd brake light with guiding lines / nightview 20° adjustable view angle Note: all acv cameras are suitable for +12V continuous operation connection: red +12V switched load-stable (fused) black ground car body direct Product characteristic: Design: plastic Color: black / red Extras: guiding lines via jumper, nightview and 20° adjustable view angle Image sensor: 1/3" CMOS TV system: NTSC Effective pixels: 976 x 592 Lens: 1,9mm / F 2.0 Min.Lux: 0 Lux during night view Resolution: 600 TV lines Lens angle diagonal: 160° + 5° View angle: horizontal 115° vertical 75° + 5° IP Rating: IP 67 Terminal: 4-pin mini-plug ( male ) 5,2 mm Power supply: DC 12V + 10% Current consumption: 150mA during active night vision function Operating temperature: -30°C - 75°C Storage temperature: -40°C - 80°C Measurements: see 3´rd OEM brake light Pigtail at the camera: 1 Meter cable with 4-Pin mini plug (male) 5,2 mm incl. 1 jumper Cable kit: 6,5 Meter extension cable incl. 3 meter power wire to connect at the reverse light and inlay cable to connect at the power from the device 4-Pin mini plug (female) 10 mm and plug (male) 5,2 mm 0,2 Meter power wire harness incl. fuse and video connector (RCA) Installation accessories: camera connection to interfaces > Relay solid state close 2V-12V/1,5A max: 40-AD-REMOTE camera connection to reversing light > Rear viev camera voltage stabilizer reverse switch signal: 771000-6100 Optional accessory: Camera cable extension for acv camera 5m: 771000-6305 Camera cable extension for acv camera 10m: 771000-6310 Camera cable extension for acv camera 15m: 771000-6315